One-component polyurethane primer based on a reactive binder for parquet and floor coverings. It is used as a base to improve adhesion on surfaces such as concrete, plaster, wood, as well as for systems with underfloor heating. Also used as a barrier primer on concrete substrates up to a residual moisture content of 5 CM%

Transparent

the surface must be dry, firm, clean and free of dust and grease. Remove all parts that can affect adhesion as well as other unstable parts, remains of paints and varnishes, floor coverings, etc. Before use, leave the primer to adjust to room temperature. Primer is applied with a short-haired roller or a fine brush. For highly absorbent substrates, apply the primer in two layers. Apply the second layer on the previously dried primer after 2-3 hours. If the primer is used as a moisture blocker, it must be applied in 2 layers until the substrate is completely saturated. Glue the parquet on a clean surface within 72 hours.

As a primer: 90-150g/m² depending on the roughness and absorbency of the substrate and the application method. As a moisture barrier: 220-300g/m² depending on roughness and absorbency of the substrate and the application method

brush or roller

+15C do +25C

3h

Primer as a moisture barrier on unfinished concrete substrates.

originally closed and stored in dry area, at temperatures from +5°C to +30°C. 

5L