Water-based fiber-reinforced parquet jointing compound which reduce shrinkage with a mild fragrance. It is designed to fill irregularities and small joints up to 3 mm in width.

light beige

Before use, bring the product to room temperature and shake well. It is mixed with fine dust obtained from the final parquet sanding (100-grit) and can fill joints up to 3 mm wide. Due to fiber reinforcement, it offers low shrinkage in joints, improved workability, and better sanding properties. The parquet must be dry, cleaned of grease and impurities and sanded with a gradual increase in the sandpaper granulation from coarse to very fine. It is applied with a stainless-steel metal trowel. Avoid using ordinary steel spatulas, as they can rust in contact with water and release dark stains on the treated wooden parquet surface. Do not dilute. Wash tools with water immediately after use.

7-11 m²/l in one layer or 80-120 g/m², depending on joint size, type of wood and application method

optimal working temperature 20°C, with maximum air humidity up to 70%.

after application 45 - 60 min (depends on joint size, application temperature, relative air humidity, for larger joints the drying time for sanding is extended)

interior

illing joints and minor parquet damage

originally closed and properly stored product (dry, ventilated room, on wooden pallets) at temperatures from +5°C to +35°C. Protect from freezing.

1L, 5L