PARFIX K22 PRIMER is a single component water-based primer and consists of nano-dispersed resin particles, which guarantee high penetration of the coating even in the case of low-absorbent substrates. It is recommended as a primer, which removes residual dust and for the surface consolidation of absorbent substrates, cement and anhydride /gypsum/ self-leveling masses.

shake well before use. It is applied to solid surfaces without structural defects, permanently dry and cleaned of fine particles of grass and other substances. Before applying, the substrate must be adequately dry. Do not spill the primer on the substrate, but apply it using a roller/brush evenly over the entire surface. After application, leave the primer to fully dry, and only then continue with further work. After finishing the work, wash the tool with water. It is used in the system with PARFIX K glue

100g/m²

+10°C to +25°C

8mm microfiber roller/brush

with water

3-4 hours (depending on the amount applied and the absorbency of the substrate)

binding of residual dust, surface consolidation, substrate surface, on which wooden coverings are glued after drying, with acrylic-based and reactive resins adhesives

store in the original and well-closed package at a temperature of +10 to +25 degrees, protected from direct sunlight.

Protect from frost during transport and storage. Avoid prolonged exposure to temperatures below 0⁰C.

The product is intended for professional use.

5kg