Two-component, water-based, odorless polyurethane lacquer is used for fine finishing of parquet surfaces.

milky white

before varnishing, the lacquer should be shaken well in the original package. Do not add water. Pour component B (hardener) into component A and shake well for 30-40 seconds. Wait for it to stand for 10-15 minutes, be sure to strain before use. The layer of applied lacquer has a milky appearance that becomes completely transparent during drying. It is applied with a roller for water-based lacquer or with a brush in 2-3 layers on previously applied one layer of PARLACK BASIC PARQUET LACQUER, which has been previously polished and vacuumed. After drying, it is polished with mesh N°180-240 and vacuumed, then a second layer is applied. The finish layer of lacquer reaches hardness after 72 hours.

about 9-11 m²/l for one layer, depending on the wood porosity and the method of application

optimal working temperature from +15°C to +25°C, relative humidity between 65-80%

4h at 20°C, 65% relative humidity

Com.A:Com.B = 10:1 (by volume)

dry to touch 1 hour and 30 minutes, reapply after 12 hours

gloss 65-80%

interior

recommended for use on medium and heavily loaded surfaces

originally closed and properly stored product (dry, ventilated room, on wooden pallets) at temperatures from +5°C to +25°C. Protect from freezing

component A (5l) + component B (0.5l)